Dacking Sheet Work In Lal Kua Ghaziabad

It sounds like you might be referring to Decking Sheet Work (commonly used in construction). If that’s correct, here is a clear explanation: Decking Sheet Work – Overview Decking sheets are galvanized steel sheets used as a permanent shuttering (formwork) and structural component in buildings. They support wet concrete during casting and become part of the composite slab after curing. 1. Purpose of Decking Sheet Work Provides formwork for concrete slabs. Increases strength through composite action between steel and concrete. Reduces construction time (no removing formwork). Allows longer spans with fewer beams. Reduces dead load compared to traditional RCC shuttering. 2. Materials Used Galvanized steel sheets (0.8–1.2 mm thick) Self-drilling screws / shear connectors Concrete (M20–M30 grade depending on design) Reinforcement bars if required by structural design 3. Steps in Decking Sheet Work a. Preparation Clean the beams. Mark sheet placement. Check beam alignment and spacing. b. Fixing Deck Sheets Lay sheets with proper overlap (usually 50–75 mm). Fix to beams using self-tapping screws or welded studs. Ensure sheets are level and tight. c. Reinforcement Place mesh or rebars if required. Install shear connectors (if part of design). d. Concreting Pour concrete carefully starting from one end. Ensure vibration for proper compaction. Cure as per standard procedure. 4. Advantages Faster construction Less shuttering and scaffolding Lightweight and strong Fire-resistant composite slab Cost-effective for multi-story buildings If this is NOT what you meant, tell me the correct term and I’ll explain that instead.